O’Berry Squeak No More Kit With Additional 50 bonus Screws 100 Total


O'Berry Enterprises 3233 plus 50 - The squeek no more kit can be used on hardwood, carpeted, and linoleum floors. Scored screw is engineered to snap off at the exact point every time. Does not damage floor coverings. Permanently eliminates floor noise under carpeted, vinyl, hardwood, and linoleum floors. Most floor squeaks are caused by nails that are working loose and rubbing on the floorboard.

Is the most cost effective way to stop floor squeaks in carpeted floors. 2 square recess screwdriver bit. Zinc die-cast alignment, and depth control fixture drives scored screw to the exact depth. Kit includes alignment and depth control fixture, 50 scored screws, plud 50 exra screws and a No. The kit will eliminate most squeaks that you have under carpeted or hardwood floors.

O'Berry Squeak No More Kit With Additional 50 bonus Screws 100 Total - Squeeeeek no more is an excellent product especially when there is no access to the floor joists. This product can be used directly through your carpeting. Does not damage floor coverings. For use with a cordless driver/drill or corded drill. The sooner you can eliminate this from happening, the better. Squeek-no-more kit comes with complete instructions to help you eliminate those pesky floor and stair squeaks.

More information about O'Berry Enterprises 3233 plus 50

O'BERRY ENTERPRISES 3251 Squeak Replacement Screw 50 Count


Standard Plumbing Supply 3251 - Easy installation and easy handling. The product is manufactured in China. 50 count, replacement screws For Squeak No More Kit For #3233. The product is manufactured in China. The product is highly durable and easy to use. Easy installation and easy handling.

More information about Standard Plumbing Supply 3251


Similar products



Minwax 13611000 Wood Putty, 3.75 Ounce, Golden Oak


Minwax 13611000 - Minwax 13611000 wood Putty, 3. 75 ounce, golden Oak The product is manufactured in China. Easy installation and easy handling. 3. 75-ounce. Fills nail holes and covers other minor imperfections in bare, painted, stained, and finished wood. Color-matched to Minwax wood finish stains. Golden Oak. Easy to use, no sanding necessary.

The product is highly durable and easy to use.

More information about Minwax 13611000


Similar products



CH Hanson 03040 Magnetic Stud Finder


CH Hanson 03040 - 3. 75-ounce. Soft grip for easy grabbing and gentle touch. The product is highly durable and easy to use. Golden Oak. The ch hanson 03040 magnetic stud finder aids in locating metal and wood studs, saving you time and hassle when trying to complete a project. Ideal for remodeling, new construction, and DIY projects.

2 way level for ease of marking. Fills nail holes and covers other minor imperfections in bare, painted, stained, and finished wood. Color-matched to Minwax wood finish stains. Small and compact, easily fits in pocket. The product is manufactured in China. No batteries required. Easy installation and easy handling.

CH Hanson 03040 Magnetic Stud Finder - Scan depth: 1 inch. Easy to use, no sanding necessary. Powerful magnets allows hands free use.

More information about CH Hanson 03040


Similar products



Squeeeek No More - O'Berry Counter Snap Kit for Wood Floors


O'Berry Enterprises 3232 - The hole that is left is easily concealed with wood filler. Easy installation and easy handling. Fills nail holes and covers other minor imperfections in bare, painted, stained, and finished wood. Color-matched to Minwax wood finish stains. 2 way level for ease of marking. The score is 1/2 inch from the head. Excellent product for stopping those squeaks that have annoyed you for years! The key to the Counter-Snap screw fastening system is the specially coated scored screw.

The product is manufactured in China. When being driven through the counter-snap fixture, The fixture stops the score 1/8 of an inch below the surface and after the snap there is 2 inches of screw securing the wood. The hole looks the same as the hole of a trim nail that is counter-sunk. Easy to use, no sanding necessary.

Squeeeek No More - O'Berry Counter Snap Kit for Wood Floors - Scan depth: 1 inch. 3. 75-ounce. Powerful magnets allows hands free use. This kit contains qty 50 screws are for stopping squeaks between or on the joist. Plus one driver bit and easy to follow instructions.

More information about O'Berry Enterprises 3232


Similar products



Part # 3154 - Squeeeeek No More Counter Snap *At Joist Only* Starter Pack Kit


O'Berry 3154 - Easy installation and easy handling. Fills nail holes and covers other minor imperfections in bare, stained, painted, and finished wood. Color-matched to Minwax wood finish stains. This i know seems confusing but it means that thread is only on the hardwood and not the subfloor so it cannot stop the movement.

We designed the counter-Snap screws for between the joist to have a thread on both boards at the same time. Soft grip for easy grabbing and gentle touch. Easy to use, no sanding necessary. We use our weight to push the floor subfloor together then the fixture forces the head to snap off 1/4 inch below the top of the wood flooring.

Part # 3154 - Squeeeeek No More Counter Snap *At Joist Only* Starter Pack Kit - The counter-snap package includes 50 scored screws, a square-headed driver bit, a snap off fixture, and complete instructions. One screw is designed for use at the joist. Just fill the small hole with a wood filler to conceal it and you're done. We make two screws to stop floor squeaks in hardwood floors. This screw has two different pitches separated by a section where there is no thread.

3. 75-ounce.

More information about O'Berry 3154


Similar products



Squeeeek No More/O'Berry Counter Snap Kit #3232 For Hardwood Floors with Replacement Pack


O'Berry Enterprises - When being driven through the counter-snap fixture, The fixture stops the score 1/4 of an inch below the surface and after the snap there is 2 inches of screw securing the wood. O'berry 3232 squeeeeek no more counter snap kit - hardwood floors: The key to the Counter-Snap screw fastening system is the specially coated scored screw.

Scan depth: 1 inch. The small hole then can be filled with a wood filler to conceal the screw. The hole looks the same as the hole of a trim nail that is counter-sunk. This kit is for hardwood floors - not for carpeted floors. Easy to use, no sanding necessary. Fills nail holes and covers other minor imperfections in bare, painted, stained, and finished wood.

Squeeeek No More/O'Berry Counter Snap Kit #3232 For Hardwood Floors with Replacement Pack - Color-matched to Minwax wood finish stains. This stops the movement and squeaks. Easy installation and easy handling. For carpeted floors use kit #3233 which contains a different snap off tool made for carpet and linoleum or vinyl floors. This kit contains qty 50 screws are for stopping squeaks between or on the joist.

Plus one driver bit and easy to follow instructions. Using this kit stops the movement of floor boards and squeaks.

More information about O'Berry Enterprises


Similar products



2 Pack - O'BERRY ENTERPRISES 3233 "SQUEEEEEK NO MORE" FLOOR REPAIR KIT


O'Berry Enterprises - Golden Oak. Scan depth: 1 inch. This kit contains qty 50 screws are for stopping squeaks between or on the joist. Plus one driver bit and easy to follow instructions. Using this kit stops the movement of floor boards and squeaks. The screw is scored so when driven through the fixture it snaps 1/4" below the top of the hardwood.

The small hole then can be filled with a wood filler to conceal the screw. The counter-snap package includes 50 scored screws, a snap off fixture, a square headed driver bit and complete instructions. We designed the counter-Snap screws for between the joist to have thread in both boards at the same time.

2 Pack - O'BERRY ENTERPRISES 3233 "SQUEEEEEK NO MORE" FLOOR REPAIR KIT - The joist screw won't work between the joist try O' Berry's 3236 because the separation of thread is greater than the thichness of the hardwood flooring and the subfloor. The counter-snap hardwood Trim Screws are for stopping squeaks between the joists. The screw is scored so when driven through the fixture it snaps 1/4" below the top of the hardwood.

The small hole then can be filled with a wood filler to conceal the screw. Kit is for hardwood floors/NOT carpeted floors. Easy to use, no sanding necessary. No batteries required.

More information about O'Berry Enterprises


Similar products



Disco Automotive 8112 Phillips Trim Screw Assortment


Disco Automotive 8112 - Black and zinc Phillips washer head trim screws. 3. 75-ounce. 255 total pieces. Golden Oak. The product is highly durable and easy to use. Phillips Trim Screw Assortment. Fills nail holes and covers other minor imperfections in bare, painted, stained, and finished wood. Color-matched to Minwax wood finish stains. Tool snaps screw at correct level for wood floors.

Kit contains: 50 screws, one driver bit, one counter snap fixture PLUS 50 replacement screws 100 total screws. 2 way level for ease of marking. Contains 18 different sizes. Small and compact, easily fits in pocket. Sold each. This kit contains qty 50 screws are for stopping squeaks between or on the joist. Plus one driver bit and easy to follow instructions.

Disco Automotive 8112 Phillips Trim Screw Assortment - Using this kit stops the movement of floor boards and squeaks. The screw is scored so when driven through the fixture it snaps 1/4" below the top of the hardwood. The small hole then can be filled with a wood filler to conceal the screw. The counter-snap package includes 50 scored screws, a snap off fixture, a square headed driver bit and complete instructions.

More information about Disco Automotive 8112


Similar products



Dap 18370 Self-Leveling Concrete 3.0 Sealant 9.0-Ounce


Dap 18370 - Won’t crack or shrink & provides excellent adhesion, flexibility and durability for a permanent waterproof seal. Sold each. Powerful magnets allows hands free use. Can be applied in all weather and below freezing temperatures. Permanently watertight and weather tight. Golden Oak. Black and zinc Phillips washer head trim screws.

Contains 18 different sizes. Scan depth: 1 inch. 3. 75-ounce. No batteries required. Easy to use, no sanding necessary. Ideal for filling and sealing horizontal cracks in sidewalks, patios, garage floors, concrete steps, above-ground foundations, concrete driveways, and many other masonry surfaces. Mold and mildew resistant.

Dap 18370 Self-Leveling Concrete 3.0 Sealant 9.0-Ounce - Tool snaps screw at correct level for wood floors. Kit contains: 50 screws, one driver bit, one counter snap fixture PLUS 50 replacement screws 100 total screws. This kit contains qty 50 screws are for stopping squeaks between or on the joist. Plus one driver bit and easy to follow instructions. Using this kit stops the movement of floor boards and squeaks.

More information about Dap 18370


Similar products



ProSensor 710 Franklin Sensors ProSensor 710 Precision Stud Finder Yellow


Franklin Sensor ProSensor 710 - Tips for a good project:. Tool snaps screw at correct level for wood floors. Kit contains: 50 screws, one driver bit, one counter snap fixture PLUS 50 replacement screws 100 total screws. Sold each. Specially formulated with Kwik Dry technology allowing it to be exposed to water and moisture after only three hours without washing out.

It is the easy way to find studs. 2 permits are important. Golden Oak. Easy installation and easy handling. Scan depth: 1 inch. Ideal for filling and sealing horizontal cracks in sidewalks, concrete steps, concrete driveways, garage floors, patios, above-ground foundations, and many other masonry surfaces. Mold and mildew resistant.

ProSensor 710 Franklin Sensors ProSensor 710 Precision Stud Finder Yellow - Soft grip for easy grabbing and gentle touch. Identifies the width of hidden objects so that you not only know the position of hidden objects, but so you also know the size of them. No batteries required. Bright leds lights illuminate to indicate the position of hidden objects - making it very easy to visualize the position of studs.

255 total pieces. The prosensor 710 is faster, less error prone and more accurate than other products on the market.

More information about Franklin Sensor ProSensor 710


Similar products