ROSENICE Silent Clock Movement Kits White Straight Clock Hand for DIY Clock Replacement

#ad
#ad
18541551ZU45075 #ad - 14. 2 x 6 x 1. 5cm/ 5. 6 x 2. 4 x 06 inchLxWxH. High quality for durable and long-lasting use. Easy to install and use with long service life. Silent and precise during working. Ergonomic design for working of highly performace. Package including1 * silent clock movement Kits White Straight Clock Hand for DIY Clock Replacement Material: plastic and aluminumpackage size: approx.

ROSENICE Silent Clock Movement Kits White Straight Clock Hand for DIY Clock Replacement #ad - This clock movement also features a high-torque motor that can drive up to lightweight, balanced clock hands. Features- Color: White. Material: Plastic and Aluminum. Package Size: Approx. 14. 2 x 6 x 1. 5cm/ 5. 6 x 2. 4 x 06 inchLxWxH. Easy to install and use with long service life. Silent and precise during working. Ergonomic design for working of highly performace.

High quality for durable and long-lasting use.

More information about 18541551ZU45075 #ad

5V Logic ADA1501 - Adafruit Trinket - Mini Microcontroller

#ad
#ad
Adafruit 100232 #ad - Micro-usb jack for power and/or usb uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram. 5. 25k bytes available for use 2. 75k taken for the bootloader. The 5v version can run at 8 MHz or at 16MHz by setting the software-set clock frequency. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design.

There are two versions of the Trinket. Use the 3v one to interface with sensors and devices that need 3V logic, or when you want to power it off of a LiPo battery. It's our lowest-cost arduino-ide programmable board! the attiny85 is a fun processor because despite being so small, and 5 I/O pins, it has 8K of flash, including analog inputs and PWM 'analog' outputs.

There are some things you trade off for such a small and low cost microcontroller! Trinket does not have a Serial port connection for debugging so the serial port monitor will not be able to send/receive data Some computers' USB v3 ports don't recognize the Trinket's bootloader. Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power.

5V Logic ADA1501 - Adafruit Trinket - Mini Microcontroller #ad - We designed a usb bootloader so you can plug it into any computer and reprogram it over a USB port just like an Arduino. Up to 16v input, reverse-polarity protection, thermal and current-limit protection. Simply use a usb v2 port or a usb hub in between attiny85 on-board, 8k of flash, 512 bytes of eeprom internal oscillator runs at 8MHz, 512 byte of SRAM, but can be doubled in software for 16MHz.

More information about Adafruit 100232 #ad


Similar products



Adafruit 24 RGB LED Neopixel Ring

#ad
#ad
Adafruit 100226 #ad - The rings are 'chainable' - connect the output pin of one to the input pin of another. Micro-usb jack for power and/or usb uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram. 5. 25k bytes available for use 2. 75k taken for the bootloader. Power the whole thing with 5VDC and you're ready to rock.

Does not include any other accessories. Up to 16v input, reverse-polarity protection, thermal and current-limit protection. Adafruit part Number: 1586. Each one has ~18ma constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim.

Adafruit 24 RGB LED Neopixel Ring #ad - On-board 5. 0v power regulator with 150ma output capability and ultra-low dropout. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Round and round and round they go! 24 ultra bright smart LED NeoPixels are arranged in a circle with 2.

6" 66mm outer diameter. Stock type: NeoPixels >> Rings. Attiny85 on-board, 8k of flash, 512 bytes of eeprom internal oscillator runs at 8MHz, 512 byte of SRAM, but can be doubled in software for 16MHz.

More information about Adafruit 100226 #ad


Similar products



ROSENICE Silent Clock Movement Kits Red Straight Clock Hand for DIY Clock Replacement

#ad
#ad
ROSENICE #ad - Up to 16v input, reverse-polarity protection, thermal and current-limit protection. Adafruit part Number: 1586. The second hand moves smoothly around clock dial. Material: plastic aluminum. Package size: approx. Stock type: NeoPixels >> Rings. On-board 5. 0v power regulator with 150ma output capability and ultra-low dropout.

14. 2 x 6 x 1. 5cm/ 5. 6 x 2. 4 x 06 inchLxWxH. High quality for durable and long-lasting use. Easy to install and use with long service life. Silent and precise during working. Ergonomic design for working of highly performace. Package including1 x silent clock movement kits red straight clock hand for diy clock Replacement Attiny85 on-board, 512 bytes of eeprom internal oscillator runs at 8MHz, 512 byte of SRAM, 8K of flash, but can be doubled in software for 16MHz.

ROSENICE Silent Clock Movement Kits Red Straight Clock Hand for DIY Clock Replacement #ad - Usb bootloader with a nice led indicator looks just like a USBtinyISP so you can program it with AVRdude with a simple config modification and/or the Arduino IDE with a few simple config modifications. This clock movement also features a high-torque motor that can drive up to lightweight, balanced clock hands.

Features- Color: Red.

More information about ROSENICE #ad


Similar products



Hicarer 28 mm Long Shaft Quartz Clock Movement Clock Parts Repair Kit White

#ad
#ad
Hicarer #ad - 85 mm/ 3. 3 inch Minute hand: approx. 120 mm/ 4. 7 inch; Second hand is approx. 109 mm/ 4. 3 inch package includes: 1 x quartz clock movement 1 x minute hand 1 x hour hand 1 x second hand 1 x plastic washer 1 x Brass washer 1 x Brass nut 1 x Metal hook Attiny85 on-board, 512 byte of SRAM, 512 bytes of eeprom internal oscillator runs at 8MHz, 8K of flash, but can be doubled in software for 16MHz.

Usb bootloader with a nice led indicator looks just like a USBtinyISP so you can program it with AVRdude with a simple config modification and/or the Arduino IDE with a few simple config modifications. Micro-usb jack for power and/or usb uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.

Hicarer 28 mm Long Shaft Quartz Clock Movement Clock Parts Repair Kit White #ad - 5. 25k bytes available for use 2. 75k taken for the bootloader. 109 mm/ 4. 3 inch. Size detail: movement shaft is 28 mm/ 1-1/ 10 inches ling, thread length is 204 mm/ 4/ 5 inches; jump second movement is suitable for 12 - 16 mm/ 12/ 25 - 5/ 8 inches thick clock panel. Up to 16v input, reverse-polarity protection, thermal and current-limit protection.

Adafruit part Number: 1586.

More information about Hicarer #ad


Similar products



AmazonBasics 4-Port USB 2.0 Ultra-Mini Hub

#ad
#ad
AmazonBasics HU2K44N3 #ad - Micro-usb jack for power and/or usb uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram. 5. 25k bytes available for use 2. 75k taken for the bootloader. Over-current detection and protection. 120 mm/ 4. 7 inch; Second hand is approx. Power mode:Bus-powered mode. Automatic connection and speed detection.

AmazonBasics 4-Port USB 2.0 Ultra-Mini Hub #ad - Package detail: includes hardware, 3 hands and protect cardboard box and instructions, hanger, make your DIY clock project successful. Usb 2. 0 high-speed interface, supports data rates of 1. 5/12/480 mbps. 109 mm/ 4. 3 inch. Plug-and-play; hot-plugging; driver free. On-board 5. 0v power regulator with 150ma output capability and ultra-low dropout.

Max output per port: 500MA. Led to indicate power status. Amazonbasics Gel sticker on the cable connector. In stock & Ready to Ship.

More information about AmazonBasics HU2K44N3 #ad


Similar products



How to Draw: drawing and sketching objects and environments from your imagination

#ad
#ad
Design Studio Press #ad - How to draw is for artists, architects and designers. You will learn how to draw any object or environment from your imagination, starting with the most basic perspective drawing skills. Stock type: NeoPixels >> Rings. Backwards compatible with USB 1. 1. In stock & Ready to Ship. Micro-usb jack for power and/or usb uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.

How to Draw: drawing and sketching objects and environments from your imagination #ad - 5. 25k bytes available for use 2. 75k taken for the bootloader. Center hole to the tip length: hour hand is approx. 109 mm/ 4. 3 inch. The research and design processes used to generate visual concepts are demonstrated, which link to video tutorials for that section of the book! With a combined 26 years of teaching experience, making it much easier for you to draw things never-before-seen! Best of all, more than 25 pages can be scanned via a smartphone or tablet using the new Design Studio Press app, Scott Robertson and Thomas Bertling bring you the lessons and techniques they have used to help thousands of their students become professional artists and designers.

120 mm/ 4. 7 inch; Second hand is approx. Match power: small power consumption, just need 1 of 1. 5 v aa battery that can run a long time; Warm notice: battery is not included in the package.

More information about Design Studio Press #ad


Similar products



How to Render: the fundamentals of light, shadow and reflectivity

#ad
#ad
Design Studio Press #ad - Rendering is the next step after drawing to communicate ideas more clearly. Up to 16v input, reverse-polarity protection, thermal and current-limit protection. Adafruit part Number: 1586. The second section focuses on the physics of reflectivity and how to render a wide range of materials utilizing this knowledge.

How to Render: the fundamentals of light, shadow and reflectivity #ad - In stock & Ready to Ship. Backwards compatible with USB 1. 1. Package detail: includes hardware, 3 hands and protect cardboard box and instructions, hanger, make your DIY clock project successful. Usb 2. 0 high-speed interface, supports data rates of 1. 5/12/480 mbps. Design Studio Press. This book is divided into two major sections: the first explains the physics of light and shadow.

On-board 5. 0v power regulator with 150ma output capability and ultra-low dropout. 85 mm/ 3. 3 inch; Minute hand is approx. Size detail: movement shaft is 28 mm/ 1-1/ 10 inches ling, thread length is 204 mm/ 4/ 5 inches; jump second movement is suitable for 12 - 16 mm/ 12/ 25 - 5/ 8 inches thick clock panel.

More information about Design Studio Press #ad


Similar products



ROSENICE Silent Clock Movement Kits for DIY Clock Replacement Black

#ad
#ad
ROSENICE #ad - Design Studio Press. Material: plastic aluminum. Package size: approx. 85 mm/ 3. 3 inch; Minute hand is approx. Stock type: NeoPixels >> Rings. 16 * 7 * 4cm/ 6. 3 * 2. 8 * 1. 6 inchl*W*H. Easy to install and use with long service life. Silent and precise during working. Ergonomic design for working of highly performace. High quality for durable and long-lasting use.

The second hand moves smoothly around clock dial. Package detail: includes hardware, 3 hands and protect cardboard box and instructions, hanger, make your DIY clock project successful. Usb 2. 0 high-speed interface, supports data rates of 1. 5/12/480 mbps. Center hole to the tip length: hour hand is approx. Up to 16v input, reverse-polarity protection, thermal and current-limit protection.

ROSENICE Silent Clock Movement Kits for DIY Clock Replacement Black #ad - Adafruit part Number: 1586. On-board 5. 0v power regulator with 150ma output capability and ultra-low dropout. This clock movement also features a high-torque motor that can drive up to lightweight, balanced clock hands.

More information about ROSENICE #ad


Similar products



Alpha Metals 13460 .75 oz .050 Electric Solder

#ad
#ad
Jensen (Home Improvement) 13460 #ad - 120 mm/ 4. 7 inch; Second hand is approx. Micro-usb jack for power and/or usb uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram. 5. 25k bytes available for use 2. 75k taken for the bootloader. Stock type: NeoPixels >> Rings. The product is manufactured in China. Backwards compatible with USB 1.

Alpha Metals 13460 .75 oz .050 Electric Solder #ad - 1. The product is manufactured in China. The product is. 75oz. 050 elec Solder. Design Studio Press. Over-current detection and protection. On-board 5. 0v power regulator with 150ma output capability and ultra-low dropout. Easy to use. Up to 16v input, reverse-polarity protection, thermal and current-limit protection. Adafruit part Number: 1586.

Easy to use. 16 * 7 * 4cm/ 6. 3 * 2.

More information about Jensen (Home Improvement) 13460 #ad


Similar products



Winsor & Newton Bleedproof Marker Paper Pad, 9" x 12"

#ad
#ad
Winsor & Newton 6002001 #ad - Material: plastic aluminum. Package size: approx. 14. 2 x 6 x 1. 5cm/ 5. 6 x 2. 4 x 06 inchLxWxH. Easy to install and use with long service life. Silent and precise during working. Ergonomic design for working of highly performace. High quality for durable and long-lasting use. Convenient metal hook: delicate spindle quartz clock replacement movement parts with metal hook, which is convenient to use.

Winsor & Newton Bleedproof Marker Paper Pad, 9" x 12" #ad - Center hole to the tip length: hour hand is approx. Design Studio Press. Backwards compatible with USB 1. 1. Attiny85 on-board, 8k of flash, 512 bytes of eeprom internal oscillator runs at 8MHz, 512 byte of SRAM, but can be doubled in software for 16MHz. Usb bootloader with a nice led indicator looks just like a USBtinyISP so you can program it with AVRdude with a simple config modification and/or the Arduino IDE with a few simple config modifications.

Micro-usb jack for power and/or usb uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram. 5. 25k bytes available for use 2. 75k taken for the bootloader. Contains 50 sheets.

More information about Winsor & Newton 6002001 #ad


Similar products