As an Amazon Associate I earn from qualifying purchases.
Vortex #ad - These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.
Nightforce Optics #ad - Precise tolerances - precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened. Unique design - this scope mount features a cnc machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws.
It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
This unique design and construction provides the performance of steel at half the weight. Note - clean all mating surfaces thoroughly before mounting. Specifications - these x-treme duty unimount scope ringmounts are for 30mm scope tubes, and feature a 20 MOA taper; Available in different heights: 1. 125", 1. 375" and 1. 5".
Nightforce Optics #ad - Note - clean all mating surfaces thoroughly before mounting. Precise tolerances - precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
Unique design - this scope mount features a cnc machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
375" high and fits 30mm scope tubes; it features a Zero MOA taper and three-jaw clamping system; For guns with 20 MOA rails. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns. This unique design and construction provides the performance of steel at half the weight.
NightForce #ad - Specifications - this one-piece mount is designed for 30 mm scope tubes diameter and features a 20 MOA Taper; Rings Height: 1. 540"; cap screws: 25 in-lbs; crossbolts: 100 in-lbs; Available in Dark Earth or Black anodizing.
This rings mount will hold your scope securely in place under any conceivable situation. Configurations - the commercial ultramount shares the same materials and construction as the MIL-SPEC UltraMount but has different engraved instructions and Nightforce branding.
Nightforce - since 1992, hunters, nightforce has been creating the finest scopes that are used by professionals, and competitors; Nightforce also provides a wide range of high-quality optics accessories for all your needs.
Available in three styles - a 0 moa mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters.
Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
Athlon Optics #ad - Machined into the cross-bolts, these ultra durable recoil lugs eliminate ring shift in picatinny and weaver cross slots. Increased area across the flex point of the rings increases mating surface contact ensuring a no-slip lap free design.
NightForce #ad - Note - clean all mating surfaces thoroughly before mounting. Specifications - this x-treme duty ultralight extended Unimount scope ringmount is 1. 375" high, fits 30mm scope tubes, and features a 20 MOA taper.
Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb. X-treme duty unimount - nightforce extended unimount is a tough, reliable mounting system that doesn't add substantial weight.
This unique design and construction provides the performance of steel at half the weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns. Unique design - this scope mount features a cnc machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws.
1. Vortex
#adVortex Optics Precision Extended Cantilever Mount, 20 MOA, 30mm
#adMore information #ad
Built-in 20 MOA cant. The cantilever ring mount positions the center of the riflescope tube at a height of 1. 574” 40mm from the base. Use this cantilever mount for mounting 30mm tubes.| Brand | Vortex #ad |
| Manufacturer | Vortex Optics #ad |
| Height | 2.9 Inches |
| Length | 7.5 Inches |
| Weight | 0.5 Pounds |
| Width | 3.2 Inches |
| Part Number | CM-530-20 |
| Model | CM-530-20 |
| Warranty | Unlimited, unconditional lifetime warranty. |
More information #ad
2. Athlon Optics
#adAthlon Armor Cantilever Scope Mount 30 mm 20 MOA
#adAthlon Optics #ad - Aircraft grade aluminum provide extra strength and durability to handle the toughest terrain and offers lifetime of use.More information #ad
| Brand | Athlon Optics #ad |
| Manufacturer | Athlon Optics #ad |
| Height | 4 Inches |
| Length | 5 Inches |
| Width | 4 Inches |
| Part Number | 702010 |
| Model | 702010 |
| Warranty | Lifetime warranty |
More information #ad
3. Nightforce Optics
#ad1.5in High, 30mm Rings, Black, A221, Nightforce Optics X-Treme Duty Ultralite Unimount Scope Mount, 20 MOA Taper
#adIt is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
More information #ad
Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb. X-treme duty unimount - nightforce ultralite unimount is a tough, reliable mounting system that doesn't add substantial weight. This unique design and construction provides the performance of steel at half the weight. Note - clean all mating surfaces thoroughly before mounting. Specifications - these x-treme duty unimount scope ringmounts are for 30mm scope tubes, and feature a 20 MOA taper; Available in different heights: 1. 125", 1. 375" and 1. 5".
| Brand | Nightforce Optics #ad |
| Manufacturer | Nightforce Optics #ad |
| Height | 2.5 Inches |
| Length | 7.5 Inches |
| Width | 3.4 Inches |
| Part Number | A221 |
More information #ad
4. Nightforce Optics
#adBlack, 0 MOA Taper, 1.375in, 3 Jaw/Nut, for Guns with 20 MOA Rails, 30mm Rings, Nightforce Optics X-Treme Duty Ultralite Magmount Scope Mount, A256
#adUnique design - this scope mount features a cnc machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
More information #ad
X-treme duty magmount - nightforce ultralite magmount is a tough, reliable mounting system that doesn't add substantial weight. Specifications - this x-treme duty ultralight magmount scope ringmount is 1. 375" high and fits 30mm scope tubes; it features a Zero MOA taper and three-jaw clamping system; For guns with 20 MOA rails. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns. This unique design and construction provides the performance of steel at half the weight.
| Brand | Nightforce Optics #ad |
| Manufacturer | Nightforce Optics #ad |
| Height | 2.6 Inches |
| Length | 10 Inches |
| Width | 3.4 Inches |
| Part Number | A256 |
More information #ad
5. NightForce
#ad20 MOA, 1.540in, A680, Black, NightForce UltraMount 30mm One-Piece Scope Ring Mount
#adThis rings mount will hold your scope securely in place under any conceivable situation. Configurations - the commercial ultramount shares the same materials and construction as the MIL-SPEC UltraMount but has different engraved instructions and Nightforce branding.
More information #ad
Ultramount - the nightforce ultramount was originally designed and chosen to meet the needs of USSOCOM's S-VPS, R-VPS, and P-VPS scope programs. Lightweight and durable - the ultramount's engineered combination of aluminum, strength, and titanium balances weight, steel, and stiffness to ensure a reliable and repeatable mounting solution for both bolt guns and gas guns. Nightforce - since 1992, hunters, nightforce has been creating the finest scopes that are used by professionals, and competitors; Nightforce also provides a wide range of high-quality optics accessories for all your needs.
| Brand | NightForce #ad |
| Manufacturer | Nightforce #ad |
| Part Number | A680 |
More information #ad
6. Monstrum
#adMonstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black
#adMonstrum #ad - Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts. Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.Available in three styles - a 0 moa mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters.
More information #ad
Mounts to any flat top picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil. Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
| Brand | Monstrum #ad |
| Manufacturer | Monstrum #ad |
| Part Number | ZS308-20 |
More information #ad
7. Athlon Optics
#adBlack, Athlon Optics Cantilever Scope Mount 30 MM 20 MOA
#adMore information #ad
Aircraft grade aluminum provide extra strength and durability to handle the toughest terrain and offers lifetime of use. Hard anodizing increases durability and wear resistance. Limited lifetime warranty.| Brand | Athlon Optics #ad |
| Manufacturer | Athlon Optics #ad |
| Height | 1.25 Inches |
| Length | 5 Inches |
| Width | 2 Inches |
| Part Number | 701016 |
| Model | 701016 |
| Warranty | Limited lifetime warranty |
More information #ad
8. Seekins Precision
#adKNS Precision 20 MOA 30mm Cantilever Scope Mount
#adSeekins Precision #ad - Product type: sportiNG GOODS. Package height: 24. 6 cm. Package width: 15. 5 cm. Package length: 8. 4 cm.More information #ad
| Brand | Seekins Precision #ad |
| Manufacturer | RSR Group, Inc #ad |
| Height | 1.62 Inches |
| Length | 6.25 Inches |
| Width | 3.5 Inches |
| Part Number | SEEK10640010 |
| Model | SEEK10640010 |
More information #ad
9. NightForce
#adNightForce X-Treme Duty Ultralite Extended Unimount Scope Mount, 1.375in, 20 MOA Taper, 30mm Rings, Black
#adUse a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb. X-treme duty unimount - nightforce extended unimount is a tough, reliable mounting system that doesn't add substantial weight.
More information #ad
Precise tolerances - precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened. This unique design and construction provides the performance of steel at half the weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns. Unique design - this scope mount features a cnc machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws.
| Brand | NightForce #ad |
| Manufacturer | Nightforce #ad |
| Part Number | A192 |
More information #ad
10. WARNE
#adWarne Scope Mounts 20MOA Extended Skeletonized 30mm MSR Mount, Tactical Gray
#adWARNE #ad - Lr-skel mount is cnc precision machined from 6061 aluminum and Warne has been able to reduce the weight by over 30%. Lr-skel provides an additional inch of forward cantilever.More information #ad
This allows additional elevation adjustment in your optic when Shooting ranges over 600 yards. The lr-skel mount offers 20 MOA built-in slope for long range precision Shooting.| Brand | WARNE #ad |
| Manufacturer | Warne Scope Mounts #ad |
| Height | 6.5 Inches |
| Length | 7 Inches |
| Width | 2.5 Inches |
| Part Number | LRSKEL30TW |
| Model | LRSKEL30TG |
More information #ad
