As an Amazon Associate I earn from qualifying purchases.
AERO PRECISION #ad - Department Name: Unisex-Adult. Mil-a-type 3 black hard-coat anodize. 6061 t6 extruded aluminum construction. Designed for mil-spec upper receivers with 1913 Picatinny rail. Rear ring is pushed forward 1" for better eye relief.
Midwest Gloves #ad - The country of origins United States. Midwest industries, 30mm, qd scope Mount, with 1.5" offset, Black Finish. This is a nationwide distributor of firearms and shooting sports accessories.
Vortex #ad - The cantilever ring mount positions the center of the riflescope tube at a height of 1. 435” 36. 45mm from the base. Made with pride in the USA. Vortex pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting.
The precision optic mount is precision cnc machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish.
WOLTIS #ad - Perfect for canted buis. Holds well, and placed at both a good angle and drop point. Precision CNC machined from aluminum. Snag-free profile along with optimal placement of your accessory such as a laser, lights and sights.
Very light, great low profile, fits any 20mm standard picatinny weaver rail. It snugs your accessory up tight against the weapon at 11 or 1 o'clock position. You'll be all setup for the distant shot as well as the close quarters shot when puting if get your pop up sights on it and optic sight with magnification on the upper rail.
AERO PRECISION #ad - Ridged and lightweight; Made in the USA. Mil-a-type 3 black hard-coat anodize. 6061 t6 extruded aluminum construction. Designed for mil-spec upper receivers with 1913 Picatinny rail. Mounting rings are pushed forward 2" for better eye relief.
Vortex #ad - The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement. Use this cantilever mount for mounting 30 mm telescopic sights.
Burris #ad - Complements your high-power primary optic for long-range target acquisition and weapon alignment. Allows your primary optic to remain on a higher magnification while quickly switching to a FastFire sight for ultra-fast, close quarter target engagement.
1. AERO PRECISION
#adAnodized Black APRA210500, Extended, Aero Precision Ultralight 30mm Scope Mount
#adMore information #ad
| Brand | AERO PRECISION #ad |
| Manufacturer | Aero Precision #ad |
| Height | 4 Inches |
| Length | 4 Inches |
| Weight | 0.2 Pounds |
| Width | 4 Inches |
| Part Number | APRA210500 |
| Model | APRA210500 |
More information #ad
2. Midwest Gloves
#adMidwest Industries 30mm QD Scope Mount with 1.5" Offset
#adMore information #ad
| Brand | Midwest Gloves #ad |
| Manufacturer | RSR Group, Inc #ad |
| Weight | 0.71 Pounds |
| Part Number | MWMI-QD30SM |
| Model | MWMI-QD30SM |
More information #ad
3. American Defense Mfg.
#adBlack, American Defense AD-RECON 30 STD Riflescope Optic Mount
#adAmerican Defense Mfg. #ad - The ad-recon works with scopes with Objective Housings as large as 2. 2 inch. Does not require proprietary tools for adjustment.More information #ad
Lever can be configured to lock to the front or the rear. Superior clamping surface to insure maximum rail engagement. Can be adjusted with your finger or a flat blade screwdriver.| Brand | American Defense Mfg. #ad |
| Manufacturer | American Defense Mfg #ad |
| Height | 4 Inches |
| Length | 4 Inches |
| Weight | 0.53 Pounds |
| Width | 4 Inches |
| Part Number | AD-RECON 30 STD |
| Model | AD-RECON 30 STD |
More information #ad
4. Vortex
#adVortex Optics Pro Extended Viper 30mm Cantilever Mount , Black
#adMore information #ad
| Brand | Vortex #ad |
| Manufacturer | Vortex Optics #ad |
| Height | 2.7 Inches |
| Length | 6.25 Inches |
| Weight | 0.43 Pounds |
| Width | 7.25 Inches |
| Part Number | CVP-30 |
| Model | CVP-30 |
| Warranty | Unlimited, unconditional lifetime warranty. |
More information #ad
5. Vortex
#adBlack, Vortex Optics Precision Quick-Release Extended Cantilever 30mm Riflescope Mount, 2-Inch Offset
#adVortex #ad - Weighs 8. 9 ounces. This mount positions the center of the riflescope tube at a height of 1. 45 inches 37 mm from the top surface of the Picatinny base.The precision optic mount is precision cnc machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish.
More information #ad
This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle. Made with pride in the USA. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle.| Brand | Vortex #ad |
| Manufacturer | Vortex Optics #ad |
| Height | 2.3 Inches |
| Length | 7.8 Inches |
| Weight | 0.56 Pounds |
| Width | 3.3 Inches |
| Part Number | CM-404 |
| Model | CM-404 |
| Warranty | Unlimited |
More information #ad
6. WOLTIS
#adWOLTIS 45 Degree Offset Rail Mount Picatinny Low Profile Adapter Mount Laser Light Rail Attachment Red Dot Optic Iron Sight Mount fit keltec sub 2000
#adVery light, great low profile, fits any 20mm standard picatinny weaver rail. It snugs your accessory up tight against the weapon at 11 or 1 o'clock position. You'll be all setup for the distant shot as well as the close quarters shot when puting if get your pop up sights on it and optic sight with magnification on the upper rail.
More information #ad
Can be installed in one of eight different clock positions. This is one perfect choice for keltec sub2000, your weapon is able to fold all the way when you put on this mount and install some sight models such as UTG red dot on it.| Brand | WOLTIS #ad |
| Manufacturer | WOLTIS #ad |
| Weight | 0.07 Pounds |
More information #ad
7. Vortex
#adVortex Precision QR Extended Cantilever 30mm mount with 20 MOA cant, Black CM-530-20
#adVortex #ad - Use this cantilever mount for mounting 30mm tubes. Built-in 20 MOA cant. The cantilever ring mount positions the center of the riflescope tube at a height of 1.More information #ad
574” 40mm from the base. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.| Brand | Vortex #ad |
| Manufacturer | Vortex Optics #ad |
| Height | 2.9 Inches |
| Length | 7.5 Inches |
| Weight | 0.5 Pounds |
| Width | 3.2 Inches |
| Part Number | CM-530-20 |
| Model | CM-530-20 |
| Warranty | Unlimited, unconditional lifetime warranty. |
More information #ad
8. AERO PRECISION
#adBlack, APRA210600, SPR, Aero Precision Ultralight 30MM Scope Mount
#adMore information #ad
| Brand | AERO PRECISION #ad |
| Manufacturer | Aero precision #ad |
| Weight | 0.21 Pounds |
| Part Number | FBA_AP210600 |
| Model | APRA210600 |
More information #ad
9. Vortex
#adVortex Optics Sport Cantilever 30mm Mount, 2-Inch Offset
#adMore information #ad
Weighs 6. 7 ounces. The cantilever ring mount positions the center of the riflescope tube at a height of 1. 59 inches 4039 mm from the base. Weighs 6. 7 ounces. Aluminum construction.| Brand | Vortex #ad |
| Manufacturer | Vortex Optics #ad |
| Height | 2.29 Inches |
| Length | 7.49 Inches |
| Weight | 0.42 Pounds |
| Width | 3.69 Inches |
| Part Number | CM-202 |
| Model | CM-202 |
| Warranty | Unlimited, unconditional lifetime warranty. |
More information #ad
10. Burris
#ad1" Scope Tube, Burris Mount for FastFire Reflex Red Dot Sights
#adMore information #ad
Positions a fastfire secondary optic in nearly any radial position on your primary optic. Allows your primary optic to remain on higher magnification. Scope tube mount. Made of lightweight and durable aluminum. 1" main tube. Fits 1" scope tubes.| Brand | Burris #ad |
| Manufacturer | Burris #ad |
| Height | 2 Inches |
| Length | 5 Inches |
| Weight | 4 ounces |
| Width | 4 Inches |
| Part Number | 410337 |
| Model | 410337 |
| Warranty | Every Burris optic is covered by the Burris Forever Warranty™. We will repair or replace your Burris optic if it is damaged or defective. The warranty is automatically transferred to future owners. No repair or replacement charge No warranty card needed No receipt needed No questions asked |
More information #ad
