Top 9 Attwood Bilge Pump – Boat Bilge Pumps

As an Amazon Associate I earn from qualifying purchases.

1. attwood

#ad

Attwood 4505-7 Sahara S500 Automatic Bilge Pump, 1.5-Amp Draw, ¾-Inch Interior Diameter Hose, 12-Volt, 29-Inch 16-Gauge Wire

#ad
attwood #ad - Installs quickly and easily in tight spaces, mounts horizontally only. Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations.

Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit.12-volt, 1. 5-amp draw pump is rated for 500 GPH performance at open flow at voltage of 13. 6 volts DC. Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a ¾-inch interior diameter hose. Reliably provides bilge water pumping for boats of any size. Also convenient and useful for boats of any size.
Brandattwood #ad
ManufacturerAttwood #ad
Height8.12 Inches
Length7.37 Inches
Weight0.8 Pounds
Width7.75 Inches
Part Number4505-7
Model4505-7
WarrantyNot Applicable

2. attwood

#ad

Attwood 4608-7 Tsunami T800 Bilge Pump

#ad
attwood #ad - Innovative engineering and compact design to provide the most reliable bilge pumping performance. Makes servicing simple and quick. Features premium-quality bearings and state-of-the-art brushes, alloys, and magnets.

Boaters, boat-builders and dealers all want one thing from their bilge pumps: more power! And that's what the Tsunami Series delivers with high-capacity, high-efficiency output. 12-volt pump has a barbed ¾-inch outlet and is connected with 29-inch wire. Tsunami cartridge pumps have replaceable / interchangeable motor cores. Patented shaft seal prevents leaks caused by misalignment, prevents water damage, caulked and tinned wiring eliminates wicking, and resists corrosion. Powerful, reliable pump is rated for 800 gallons per hour gph output at design voltage 13. 6 volts dc, or 760 gph at nominal voltage of 12 volts DC.
Brandattwood #ad
ManufacturerAttwood #ad
Height3 Inches
Length9 Inches
Weight1 Pounds
Width6 Inches
Part Number4608-7
Model4608-7
WarrantyNot Applicable

3. attwood

#ad

¾-Inch Interior Diameter Hose, attwood 4511-7 Sahara S1100 Automatic Bilge Pump, 1.5-Amp Draw, 1100 GPH, 29-Inch Wire, 12-Volt

#ad
attwood #ad - High capacity for larger boats and yachts. Installs quickly and easily in tight spaces, mounts horizontally only. 6 volts DC.

Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a ¾-inch interior diameter hose. Reliably provides bilge water pumping for larger recreational boats. 12-volt, 1. Compact and durable package includes pump, strainer, wire seals, and mercury-free switch in one unit. Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations. 5-amp draw pump is rated for 1100 GPH performance at open flow at voltage of 13.
Brandattwood #ad
ManufacturerAttwood #ad
Height8.62 Inches
Length7.43 Inches
Weight1.33 Pounds
Width10.93 Inches
Part Number4511-7
Model4511-7
WarrantyNot Applicable

4. attwood

#ad

Attwood 4507-7 Sahara 750 GHP Automatic Boat Bilge Water Pump

#ad
attwood #ad - Wire is caulked to prevent water from wicking through insulation jacket. Our most powerful 3/4 inch-outlet automatic pump 750 GPH at open flow, 625 GPH at 3. 3 feet head, 3/4 inch hose outlet. S750 is sized for larger recreational boats. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance. Sahara bilge pumps include 36 inch lengths of 16-gauge tinned copper wire.
Brandattwood #ad
ManufacturerAttwood #ad
Height8.12 Inches
Length7.37 Inches
Weight0.01 Pounds
Width7.75 Inches
Part Number4507-7
Model4507-7
WarrantyNot Applicable

5. MAXZONE

#ad

MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch Blue, Automatic

#ad
MAXZONE #ad - 81mm. Flow rate gph: 1100gph; volt: 12v; currenta: 3. 8a; headm: 3. 0m. Wire leadm: 1m; outlet diameter: 29mm/ 095 inch 1-1/8"; width: Approx. Built-in float switch! No separate float switch is needed. Equipped with built in electronic controlled reed sensor system for easy fully automatic operation. No power use until pump is activated by internal float switch when water level rises.
BrandMAXZONE #ad
ManufacturerSailflo #ad
Weight1.21 Pounds
Part NumberHYBP1-G1100-02

6. attwood

#ad

800 GPH, Attwood 4650-7 Tsunami Aerator Pump

#ad
attwood #ad - Pump with innovative engineering and compact design provides the most reliable aeration in contained spaces such as livewell. Uses less power for long pump and battery life. Cooler-running motors, premium materials, watertight seals and waterproof wiring.

Pumps fresh, oxygen-rich water to livewells and baitwells. Motor cartridge locks for secure placement, and unlocks for easy cleaning, maintenance, and replacement. Patented shaft seal prevents leaks caused by misalignment, caulked and tinned wiring eliminates wicking, prevents water damage, and resists corrosion. Features the most advanced materials, alloys, including premium-quality bearings and state-of-the-art brushes, and magnets.1

12-volt pump connected with 29-inch wire. Powerful, reliable pump is rated for 800 gallons per hour gph output at design voltage 13. 6 volts dc, or 750 gph at nominal voltage of 12 volts DC. Has a ¾-inch diameter, 3 ½-inch-long inlet, and a threaded ¾-inch interior diameter outlet. Cartridges are replaceable and interchangeable between bilge and aerator pumps.
Brandattwood #ad
ManufacturerAttwood #ad
Height9.38 Inches
Length6.56 Inches
Weight0.88 Pounds
Width10.69 Inches
Part Number4650-7
Model4650-7
WarrantyNot Applicable

7. attwood

#ad

Attwood 4760-4 Heavy Duty 2,000 GPH Fully Submersible Boat Bilge Pump, White Finish

#ad
attwood #ad - Locking tab and base swivel allow for eight mounting positions. Fully submersible design ideal for use in a sea chest. 3-year warranty. Sustains 2, 000 gph with 17 feet of head pressure. Stainless steel motor shaft resists corrosion.
Brandattwood #ad
ManufacturerAttwood #ad
Height7.5 Inches
Length7 Inches
Weight2.31 Pounds
Width11.5 Inches
Part Number4760-4
Model4760-4
WarrantyNot Applicable

8. attwood

#ad

Attwood 4140-4 WaterBuster Portable Pump, White

#ad
attwood #ad - Truly portable because it does not use an electrical cord nor need a power source. Comes with a 42-inch-long hose with a garden hose adapter that allows addition of a longer hose. Pump is 6 3/8 inches tall, has a 5 ¼-inch diameter, and can pump up to 200 gallons per hour.

Measures 5. 2 x 5. 2 x 6. 5 inches; weighs less than two pounds. Convenient and versatile pump that can be used where needed to remove water from areas such as boats, sump pits, pool covers, aquariums, and much more. Battery-powered pump can operate for up to 5 hours using three D-sized alkaline batteries.

Lifts water to height of 4 feet. Ideal for use in areas and on boats where there is no permanent electrical system or power source. Pumps up to 200 gallons per hour; lifts water up to 4 feet. Lifts water to a height of 40 inches; is not to be used as a permanent bilge pump. Portable, battery-operated pump for removing water. Three alkaline D batteries last 5 hours.
Brandattwood #ad
ManufacturerAttwood #ad
Height6.5 Inches
Length5.25 Inches
Weight1 Pounds
Width5.25 Inches
Part Number4140-4
Model4140-4
WarrantyNot Applicable

9. attwood

#ad

White, Attwood 3005.2674 11596-2 32" Hand Bilge Pump with Hose

#ad
attwood #ad - 25 inch hand operated pump. Essential safety accessory. Lightweight and impact resistant plastic construction. Comfortable hand grip. Removes 8 gallons per minute.
Brandattwood #ad
ManufacturerAttwood #ad
Height2.2 Inches
Length28.2 Inches
Weight1.4 Pounds
Width8.5 Inches
Part Number11596-2
Model11596-2
WarrantyNot Applicable