Winters PEM Series Steel Dual Scale Economical All Purpose Pressure Gauge with Brass Internals, 0-30 psi/kpa, 2″ Dial Display, +/-3-2-3% Accuracy, 1/4″ NPT Bottom Mount


Winters PEM199 - An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. Lower mount or center back male connection with either 1/8" or 1/4" NPT rate. This pressure gauge is suitable for plumbing, heating, water tanks, hydraulic, air conditioning, pneumatic, and air compressors.

Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. The lens for the 4" diameter dial is glass for strength and clarity. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline.

Winters PEM Series Steel Dual Scale Economical All Purpose Pressure Gauge with Brass Internals, 0-30 psi/kpa, 2" Dial Display, +/-3-2-3% Accuracy, 1/4" NPT Bottom Mount - Measures pressure with dual scale psi/kPa/Hg. The male connection is mounted on the bottom or center back of the gauge and has either a 1/4" NPT National Pipe Thread or 1/2" NPT rate. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing.

Most often, pressure gauges measure pressure relative to another reference. Vacuum/kpa with an accuracy of + or - 3/2/3%. The gauge measures pressure with a dual scale of either psi/kPa or Hg. The working pressure is a maximum of 75% of full scale value.

More information about Winters PEM199

Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Male NPT


Control Devices CR25-100 - Relief pressure adjustable from 0 to 100 psi. This control devices cr25-100 pressure relief valve has a brass body, an adjustable relief pressure, a 1/4" male NPT threaded inlet connection, and a fluorocarbon O-ring. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit.

The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. Relief valves are used in a variety of applications, petrochemical and chemical manufacturing, such as air compressors, natural gas processing, and power generation.

Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Male NPT - Control devices manufactures valves and other flow control devices. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates.

. The company, founded in 1963, is headquartered in Fenton, MO. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Brass construction and stainless steel spring for corrosion resistance. Micrometer-style nylon knob for pressure relief adjustment.

1/4" male npT threaded inlet connection.

More information about Control Devices CR25-100


Similar products



Emerson-Fisher LP-Gas Equipment, 67CH-743, 1/4" FNPT Connections, High-Pressure Regulator, Outlet: 3-35 PSI, Handwheel Adjustment, Vent, UL Listed


Emerson Regulator Technologies, Inc. 67CH-743 - The 67ch series regulators come equipped with a handwheel adjustment. Buyer agrees to comply with the above warning and all instruction manuals, bulletins and installation guides associated with this product. 67c series regulators do not have an internal relief and should be installed with additional/external overpressure protection.

Buyer agrees that responsibility for proper selection, installation, use and maintenance of any product remains solely with the purchaser and end-user. 35 mbar appliance systems. Warning !!! failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death.

Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The compact body design makes the 67C Series particularly useful in installations with space limitations. Body sizes and end connection Styles inlet x outlet: 1/4 x 1/4-inch FNPT.

Emerson-Fisher LP-Gas Equipment, 67CH-743, 1/4" FNPT Connections, High-Pressure Regulator, Outlet: 3-35 PSI, Handwheel Adjustment, Vent, UL Listed - The installation in most States must also comply with NFPA no. The 67c series is a underwriters Laboratories UL listed high-pressure regulators that meets a variety of applications in liquid and vapor service. This series contains brass materials that are not compatible with anhydrous ammonia service. Relief pressure adjustable from 0 to 100 psi.

More information about Emerson Regulator Technologies, Inc. 67CH-743


Similar products



Milton S-684-4 1/4" MNPT Male Tank Valve


Milton S-684-4 - Relief pressure adjustable from 0 to 100 psi. Micrometer-style nylon knob for pressure relief adjustment. Cap thread size of. 305-32. Cap thread size:. 305-32. Maximum air pressure: 200 pounds per square inch PSI. Milton is your number 1 source for Quality Air Accessories. Since 1943 milton has been producing Quality Air Accessories.

Other recommended tank valve size: milton #S-684 ⅛” male NPT, 1” overall length w/cap tank valve. Maximum pressure of 200 PSI. Milton covers automotive, industrial, hardware, agriculture, heavy-duty fleet and MRO markets. Handwheel Adjustment. Includes: standard valve core and plastic cap. Standard valve core with plastic cap measures at 1 1/2" overall length.

Milton S-684-4 1/4" MNPT Male Tank Valve - Maximum allowable inlet Pressure : 250 psig / 17, 2 bar. Overall length with cap: 1. 5 inch. Designed: for use with air compressor tanks to fill vessels with air. Ideal: tank valve prevents air from leaking out while allowing for air to pass through for inflation. Npt: 1/4" male national pipe thread.

More information about Milton S-684-4


Similar products



Marshall Excelsior MEGR-6120-30 Pressure Reg Bulk High Cap


AP PRODUCTS MEGR-6120-30 - Outlet connection: 1/4" FNPT. Brass construction and stainless steel spring for corrosion resistance. Handwheel Adjustment. Includes: standard valve core and plastic cap. The megr-6120 series are ul listed high-pressure regulators that meet a variety of applications for liquid or vapor service. 1/4" male npT threaded inlet connection.

Overall length with cap: 1. 5 inch. Designed: for use with air compressor tanks to fill vessels with air. Ideal: tank valve prevents air from leaking out while allowing for air to pass through for inflation. Npt: 1/4" male national pipe thread. Outlet pressure ranges : 3 - 35 psi / 0, 2 - 2, 4 bar. Micrometer-style nylon knob for pressure relief adjustment.

Marshall Excelsior MEGR-6120-30 Pressure Reg Bulk High Cap - Capacity : 750, 000 BTU/hr. The compact body design makes these regulators particularly useful in installations with space limitations. Maximum allowable inlet Pressure : 250 psig / 17, 2 bar. The megr-6120 & megr-6121 series are UL listed as high pressure, non-relief regulators. The basic megr- 6120 series regulators come equipped with a handwheel adjustment.

Inlet pressure: 250 PSI 17, 2 bar.

More information about AP PRODUCTS MEGR-6120-30


Similar products



Marshall Excelsior ME318P Pol Adapter Full Flow


Marshall Excelsior ME318P - Max. Inlet connection: 1/4" FNPT. Body sizes and end connection Styles inlet x outlet: 1/4 x 1/4-inch FNPT. The pol nut features a left hand thread and fits all standard LP gas cylinder valves. Ff pol x 1/4 inch male pipe Thread assembly, 7/8 inch hex nut. 1/4" male npT threaded inlet connection. Marshall excelsior Full Flow POL Adapter.

Milton covers automotive, industrial, agriculture, hardware, heavy-duty fleet and MRO markets. Type: Fixed. Inlet pressure: 250 PSI 17, 2 bar. Includes: standard valve core and plastic cap. Capacity : 750, 000 BTU/hr. Overall length with cap: 1. 5 inch. Designed: for use with air compressor tanks to fill vessels with air.

Marshall Excelsior ME318P Pol Adapter Full Flow - Ideal: tank valve prevents air from leaking out while allowing for air to pass through for inflation. Npt: 1/4" male national pipe thread. Caution: when installing the 1/4 inch male NPT into regulator inlet, it is recommended that Teflon tape be used instead of the thread Sealant If thread sealant is used.

Outlet connection: 1/4" FNPT. Outlet pressure ranges : 3 - 35 psi / 0, 2 - 2, 4 bar.

More information about Marshall Excelsior ME318P


Similar products



Winters PEM Series Steel Dual Scale Economy Pressure Gauge, 0-15 psi/kpa, 2" Dial Display, +/-3-2-3% Accuracy, 1/4" NPT Bottom Mount


Winters PEM136 - Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Caution: when installing the 1/4 inch male NPT into regulator inlet, it is recommended that Teflon tape be used instead of the thread Sealant If thread sealant is used.

Maximum allowable inlet Pressure : 250 psig / 17, 2 bar. Display accuracy is + or - 3/2/3% over the entire range of the gauge ASME B40100 grade B. Includes: standard valve core and plastic cap. The circular dial comes in 1. 5" 40 mm, 2" 50 mm, 2. 5" 63 mm, and 4" 100 mm diameters. Marshall excelsior Full Flow POL Adapter.

Winters PEM Series Steel Dual Scale Economy Pressure Gauge, 0-15 psi/kpa, 2" Dial Display, +/-3-2-3% Accuracy, 1/4" NPT Bottom Mount - Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. Vacuum/kpa with an accuracy of + or - 3/2/3%. The lens for the 1. 5", 2", and 2. 5"diameter dials is polycarbonate for high impact resistance. Lower mount or center back male connection with either 1/8" or 1/4" NPT rate.

More information about Winters PEM136


Similar products



Anderson Metals 57001-0404 Brass Hose Fitting, Adapter, 1/4" Barb x 1/4" NPT Male Pipe


Anderson Metals 57001-0404 - Capacity : 750, 000 BTU/hr. Max. Relief pressure adjustable from 0 to 100 psi. Intended for use with hose clamp or crimp type ferrule. Milton covers automotive, hardware, industrial, agriculture, heavy-duty fleet and MRO markets. Type: Fixed. Use with plastic tubing or rubber hose. Caution: when installing the 1/4 inch male NPT into regulator inlet, it is recommended that Teflon tape be used instead of the thread Sealant If thread sealant is used.

Handwheel Adjustment. 1/4" male npT threaded inlet connection. Excellent vibration resistance. Micrometer-style nylon knob for pressure relief adjustment. Display accuracy is + or - 3/2/3% over the entire range of the gauge ASME B40100 grade B. Body sizes and end connection Styles inlet x outlet: 1/4 x 1/4-inch FNPT.

Anderson Metals 57001-0404 Brass Hose Fitting, Adapter, 1/4" Barb x 1/4" NPT Male Pipe - The pol nut features a left hand thread and fits all standard LP gas cylinder valves. Cap thread size:. 305-32. Maximum air pressure: 200 pounds per square inch PSI. Milton is your number 1 source for Quality Air Accessories.

More information about Anderson Metals 57001-0404


Similar products



LASCO 17-6783 1/4-Inch Female Flare by 1/4-Inch Male Pipe Thread Brass Adapter


LASCO 17-6783 - Outlet connection: 1/4" FNPT. Relief pressure adjustable from 0 to 100 psi. Capacity : 750, 000 BTU/hr. Outlet pressure ranges : 3 - 35 psi / 0, 2 - 2, 4 bar. Used for fuel, oil, air, liquid petroleum LP and natural gas lines connections.1/4-inch female flare by 1/4-Inch male pipe thread. Lower mount or center back male connection with either 1/8" or 1/4" NPT rate.

Not for use in potable drinking water applications. Handwheel Adjustment. Marshall excelsior Full Flow POL Adapter. The me318p pol adapter is machined of solid brass. Used for fuel, oil, air, liquid petroleum LP and natural gas lines connections. Vacuum/kPa. Not for use in potable drinking water applications. Inlet pressure: 250 PSI 17, 2 bar.

LASCO 17-6783 1/4-Inch Female Flare by 1/4-Inch Male Pipe Thread Brass Adapter - Gauge port: 1/4" FNPT. Max. And its territories. Female flare by male pipe thread adater. Milton covers automotive, industrial, hardware, agriculture, heavy-duty fleet and MRO markets.

More information about LASCO 17-6783


Similar products



NIGO Brass Pipe Fitting, Forged Brass Tee, 1/4" x 1/4" x 1/4" 3-Way NPT Female Pipe


Nigo Industrial Co. JNT020020N - Barbed edges provide positive connection. Measures pressure with dual scale psi/kPa/Hg. Brass construction and stainless steel spring for corrosion resistance. Maximum allowable inlet Pressure : 250 psig / 17, 2 bar. Max. Marshall excelsior Full Flow POL Adapter. Relief pressure adjustable from 0 to 100 psi. Body sizes and end connection Styles inlet x outlet: 1/4 x 1/4-inch FNPT.

One piece construction. The 1/4 inch male pipe fitting fits the inlet of all standard low pressure regulators. Vacuum/kPa. Temperatures range from -65 to 250 F. Intended for use with hose clamp or crimp type ferrule. Outlet pressure ranges : 3 - 35 psi / 0, 2 - 2, 4 bar. Cap thread size:. 305-32. Maximum air pressure: 200 pounds per square inch PSI.

NIGO Brass Pipe Fitting, Forged Brass Tee, 1/4" x 1/4" x 1/4" 3-Way NPT Female Pipe - Milton is your number 1 source for Quality Air Accessories. Ltd manufactures a wide variety of valves and pipe fittings. Capacity : 750, 000 BTU/hr. Not for use in potable drinking water applications.

More information about Nigo Industrial Co. JNT020020N


Similar products



Anderson Metals Brass Pipe Fitting, Barstock Street Tee, 1/4" Female Pipe x 1/4" Male Pipe x 1/4" Female Pipe


Anderson Metals 06127-04 - Caution: when installing the 1/4 inch male NPT into regulator inlet, it is recommended that Teflon tape be used instead of the thread Sealant If thread sealant is used. Cap thread size:. 305-32. Maximum air pressure: 200 pounds per square inch PSI. Milton is your number 1 source for Quality Air Accessories. Outlet pressure ranges : 3 - 35 psi / 0, 2 - 2, 4 bar.

Milton covers automotive, hardware, industrial, agriculture, heavy-duty fleet and MRO markets. Type: Fixed. This fitting meets american society for testing and materials ASTM B584 and American Society of Mechanical Engineers ASME/American National Standards Institute ANSI B16 specifications for quality assurance.

Anderson Metals Brass Pipe Fitting, Barstock Street Tee, 1/4" Female Pipe x 1/4" Male Pipe x 1/4" Female Pipe - Pipe fittings are components used for connecting, controlling flow, terminating, and changing the direction of piping in many different industries. Since 1943 milton has been producing Quality Air Accessories. The npt threads create a tighter seal than straight threads. Pipe dimensions for tees are represented as A x B x C.

When purchasing pipe fittings, size, as this will affect material type, consider the application, shape, and required durability. Brass material lasts long. Barbed edges provide positive connection.

More information about Anderson Metals 06127-04


Similar products